© Kevin Reed trading as Reedsafe 2002 - 2018. We use cookies on this site. Our server likes them. We find the crumbs everywhere.
The Norfolk P.A.T. inspector
REEDSAFE

REEDSAFE - SERVICES 

Reliable, trustworthy, experienced. Good old fashioned values in a modern world

PAT inspection of 240 volt

appliances

This is quite likely the most common style of appliance you will have in your office or shop environment. We can test and inspect all types of 240 volt equipment from fan heaters to computers, disco equipment to washing machines, bottle fridges to glass washers. During the test we will inspect the plugs, flex, casing and general suitability of the appliance for the task it is performing in the environment where it is located. The appliance is then connected to our calibrated test equipment and the electrical readings recorded.

PAT inspection of 110 and 415 volt

appliances

Reedsafe are regularly instructed to test site tooling that operates at 110 volts. (If you are new to this, that would be the yellow connector pictured) We can inspect all site style equipment whether you are a contractor or site operator. We test for many self employed electricians, carpenters, plumbers, builders also construction sites. All we ask for on site is a safe, dry environment for us to work in. As pictured, you will also see we carry a range of adaptors for inspecting 415 volt appliances too.

PAT inspection of interconnecting

leads and extensions.

Reedsafe use specialist equipment that can also test your mass of extension leads! These days we never seem to have enough sockets under our desks so it is quite common to find a multitude of these multi-way leads in use. Whilst performing the inspection at your premises we will check for over loading and offer advice on the safe use of these leads if required. In addition to extension leads and reels, we can also check the leads that connect your computers to the socket.

Temperature verification

Reedsafe are often instructed to visit public houses, restaurants and hotels to inspect the electrical appliances listed on an inventory pending sale or transfer to a new operator. One of the checks we perform during these visits is a check on the operating temperature of fridges, freezers, ovens and fryers. This test is not a requirement for PAT inspections but is useful to determine if a refrigeration unit is performing well or a fryer is likely to overheat. It can also be useful to check the accuracy of a thermostat.

Microwave emission inspection

Reedsafe use the Robin TX90 microwave emission testing kit to verify safe operation of both domestic and commercial microwave ovens. This can be booked as a stand alone service however, when we are visiting your site to undertake your PAT inspection, Reedsafe perform this test as part of the service and at no extra charge! Using the beakers pictured, we can also verify the output power of your ovens to ensure they are running at peak performance.

Socket verification

Reedsafe will perform a visual inspection of all sockets your appliances are connected to whilst performing the PAT test at your premises. This is a free visual check that is listed as a requirement in our Code of Practice for inspection and testing. We are simply looking for evidence of over heating or damage. For an additional fee, we can also connect our test equipment to the sockets to verify correct polarity. Let us know if you would like this additional service when making your first enquiry with us.  
Tel. 01603 409629 Mob. 07818 038049 Send us mail!

CCTV systems

Reedsafe have also been installing CCTV systems since 2006. We specialise in the licensed trade so if you would like a quotation for a repair, upgrade or complete new system, do get in touch!
© Kevin Reed trading as Reedsafe 2002 - 2018. We use cookies on this site. Our server likes them.

REEDSAFE - SERVICES 

Reliable, trustworthy, experienced.

Good old fashioned values in a

modern world

PAT inspection of 240 volt appliances

This is quite likely the most common style of appliance you will have in your office or shop environment. We can test and inspect all types of 240 volt equipment from fan heaters to computers, disco equipment to washing machines, bottle fridges to glass washers. During the test we will inspect the plugs, flex, casing and general suitability of the appliance for the task it is performing in the environment where it is located. The appliance is then connected to our calibrated test equipment and the electrical readings recorded.

PAT inspection of 110 and 415 volt

appliances

Reedsafe are regularly instructed to test site tooling that operates at 110 volts. (If you are new to this, that would be the yellow connector pictured) We can inspect all site style equipment whether you are a contractor or site operator. We test for many self employed electricians, carpenters, plumbers, builders also construction sites. All we ask for on site is a safe, dry environment for us to work in. As pictured, you will also see we carry a range of adaptors for inspecting 415 volt appliances too.

PAT inspection of interconnecting

leads and extensions.

Reedsafe use specialist equipment that can also test your mass of extension leads! These days we never seem to have enough sockets under our desks so it is quite common to find a multitude of these multi-way leads in use. Whilst performing the inspection at your premises we will check for over loading and offer advice on the safe use of these leads if required. In addition to extension leads and reels, we can also check the leads that connect your computers to the socket.

Temperature verification

Reedsafe are often instructed to visit public houses, restaurants and hotels to inspect the electrical appliances listed on an inventory pending sale or transfer to a new operator. One of the checks we perform during these visits is a check on the operating temperature of fridges, freezers, ovens and fryers. This test is not a requirement for PAT inspections but is useful to determine if a refrigeration unit is performing well or a fryer is likely to overheat. It can also be useful to check the accuracy of a thermostat.

Microwave emission inspection

Reedsafe use the Robin TX90 microwave emission testing kit to verify safe operation of both domestic and commercial microwave ovens. This can be booked as a stand alone service however, when we are visiting your site to undertake your PAT inspection, Reedsafe perform this test as part of the service and at no extra charge! Using the beakers pictured, we can also verify the output power of your ovens to ensure they are running at peak performance.

Socket verification

Reedsafe will perform a visual inspection of all sockets your appliances are connected to whilst performing the PAT test at your premises. This is a free visual check that is listed as a requirement in our Code of Practice for inspection and testing. We are simply looking for evidence of over heating or damage. For an additional fee, we can also connect our test equipment to the sockets to verify correct polarity. Let us know if you would like this additional service when making your first enquiry with us.  
REEDSAFE
The Norfolk P.A.T. inspector